All About Extension Poles For Window Cleaning

All About Extension Poles For Window Cleaning

Every window cleaner should have an extension pole. These poles are crucial for cleaning windows and getting the job done. The pole system allows you to build a pole for window cleaners to the length you need. It can be used to allow a window cleaner build a pole for cleaning windows with extended lengths of 4 to 30 feet. A 30-foot pole can reach most windows, including those with 3 stories. The pole’s weight is reduced by using only the required sections, which allows for more work and less fatigue.

It is important to be familiar with the workings of every tool. These are some important facts about extension poles for window washers.

Buy Poles Locking Mechanism: Internal and External

There are two types of locking mechanisms: external locking collars and internal locking collars. External locking collars can be adjusted by loosening or tightening the collars on the pole’s outside. The EttoreUnger Add–An-Arm, and Triple Crown Poles are all examples of poles that use external locking collars. Internal locking poles have a locking mechanism that is located inside the pole. This means that there are no collars. The pole’s exterior is smooth and won’t catch. The Garelick Telescopic Pole is an example of an interior locking pole. Be careful not to tighten the screws in either case. It takes very little to keep the sections in place. Over tightening could cause damage.

Pole Tips: Combination Tapered & Threaded

The majority of poles come with a combination tapered-threaded tip. This means that they can be used with tools that fit into the taper as well as those that require standard American acme threading. Some poles, like Garelick Poles have only threaded tips. They will not work with any other tools than threaded ones. A simple threaded wooden cone, which comes with the Garelick pole (from abc), can be used to attach those tapered tools to that pole. While some brands like Ettore or Unger have proprietary tips, these can still be used with other tools. However, if the tool is attached to the same brand, the locking mechanism will keep it in place. However, if the brands are different, the other tools can still fit in the slots; the holes won’t line up.

Window washing pole length: Extended vs. Unextended

A pole can be either extended or unextended in length. The length of a pole is often used to refer to its extended length. A 24-foot pole can extend to 24 feet. An 18-foot pole can extend to 18 feet. A pole’s number of sections will be also noted. For example, 2, 3, or 4, sections. A 3-section 18-foot pole can collapse to approximately 6 feet. The length of the collapsed section is its unextended length.

Window washing pole length: How long do you need?

For tall ground-level windows, short poles (8 feet) are the best. You can reach most windows on the second and third stories with poles that are 24 feet long or more.

Replacement parts for window washing poles

Most poles can be repaired or replaced if a part breaks. To determine which section of a pole is in need of replacement, count down from the top. The pole starts with the pole tip and its section; this is section one. Section two is the next section, followed by section three. The section two collar is the first. It is also known as the small collar or number two collar. The third collar is the number three collar. It is located on the three-section.

The Best Window Cleaning Extension Poles

Extension poles are indispensable for any window cleaning poles cleaner, no matter how high the window is. There are many styles and lengths of poles to suit every job. Visit the ABC website to learn more about each pole.

Comments

No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published. Required fields are marked *